CHANGZHOU JKONGMOTOR CO.,LTD
Changzhou Jkongmotor Co., Ltd. Professional Stepper & Bldc Motor Manufacture in China with 15+ Years Experience. Certification: CE Rohs Reach ISO9001 ISO14001
Add to Cart
RS485 CANopen Nema 17 0.72nm 1.8deg Closed Loop Stepper Motor With Integrated Encoder
Advantages of step motors are low cost, high reliability, high torque at low speeds and a simple, rugged construction that operates in almost any environment. The main disadvantages in using a stepper motor is the resonance effect often exhibited at low speeds and decreasing torque with increasing speed.
Our stepper motor are widely used in engraving machine, cutting plotter, textile machine, 3D printer, medical devices, stage lighting equipment, robot, CNC machine, music fountain and other industrial automatic equipment.
Drive and motor integrated design, simplify system structure and improve system integration
Support multiple control modes including pulse/direction and bus control
Smooth and high-speed operation, precise positioning, no step lost and fast response
Low noise, adjust current in real time and reduce heat
1. 42mm Hybrid Nema 17 Integrated Stepper Motor Genaral Specification:
| Name | Nema 17 Integrated Stepper Motor |
| Model | Integrated Stepper Motor For 3d Printer |
| Motor Type | STM Integrated Steppers |
| Rated Voltage | 21v ~ 36v |
| Holding Torque | 0.48N.m / 0.72N>m |
| Step Angle | 1.8 degree |
| Current | 0.8A ~ 2.0A |
| Shaft | 5mm D-cut Shaft |
| Support Control | CANopen CiA402 |
| Usage | Printing, AOI, panel bonding, transfer equipment, etc. in PCB related equipment; |
2,Features of integrated easy servo stepper motor with controller driver:
1): A new generation of 32-bit DSP technology.
2): Support standard CANopen CiA402 protocol.
3): 4-way input function terminal, 2-way output function terminal.
4): The torque decay is reduced, and the speed can reach 3000rpm.
5): Built-in alarm output for easy monitoring and control.
6): Intelligently adjust current, reduce vibration, noise and heat, and increase efficiency by 35%.
7): Voltage range: DC24~36V.
8): 16 adjustable subdivisions, the default is 1000pulse/r.
9): Excellent high speed and rigidity, perfect integration of servo and stepper.
10): With overvoltage, undervoltage, overcurrent and other protection functions.
11): Integrated design with drive motor. Easy installation, small footprint and simple wiring.
3, Application of integrated servo stepper motor:
Printing, AOI, panel bonding, transfer equipment, etc. in PCB related equipment; camera related equipment such as camera and fingerprint; solid crystal machine, wire bonding machine, dispensing machine, beam splitter, and package tape machine in packaging.
4, General Specification of integrated step servo motor:
| Specification | ISM42-C Series | |||
| Unit | Minimum | Typical | Maximum | |
| Output current | A | 0.8~2.0 | - | 2 |
| Input voltage | Vdc | 24 | 24 | 36 |
| Rated input current | mA | 10 | 10 | 50 |
| Rated input voltage | V | - | 24 | 24 |
| Pulse frequency | kHz | 0 | - | 200 |
| Insulation resistance | MΩ | 100 | - | - |
5,Techical Data:
| Techical Data | |||
| Name | Unit | ISM42-C1 | ISM42-C2 |
| phase | Phase | 2 | 2 |
| Rated Voltage | V(DC) | 21~36 | 24~36 |
| Output Current | A | 0.8~2.0 | 0.8~2.0 |
| Holding Torque | N.m | 0.48 | 0.72 |
| Motor Length | mm | 47 | 60 |
| Weight | Kg | 0.5 | 0.65 |
| Insulation Grade | - | B | B |
| Operating Temperature | ℃ | 0~55 | 0~55 |
6,Terminal Description:
| Terminal Description | |||
| Pin | Function | Note | Interface Schematic |
| PWR | Power indicator | Power on indicator | |
| ALM | Alarm indicator | Alarm fishing indicator | |
| X0-X3 | 4 input terminal | Input/Output terminal, signal power supply 24V, support NPN and PNP two wiring modes, support terminal function software modification | |
| XCOM | Input common | ||
| Y0-Y1 | 2 output terminal | ||
| YCOM | Output common | ||
| CANH | Communication terminal | CANH communication cable | |
| CANL | Communication terminal | CANL communication cable | |
| +DC | Power input positive terminal | DC24~36V | |
| GND | Power input negative terminal | ||
7,Input / Output terminal:
| Input / Output terminal: | ||
| Pin | Name | Function |
| X0 | Input terminal | Input/Output terminal, signal power supply 24V, support NPN and PNP two wiring modes, support terminal function software modification |
| X1 | ||
| X2 | ||
| X3 | ||
| XCOM | Common input terminal | |
| Y0 | Output terminal | Output terminal, the maximum driving current is 50mA, support terminal function software modificatio |
| Y1 | ||
| YCOM | Common output terminal | |
8,DIP switch settings:
| DIP switch settings: | ||
| Pin | Sign | Function |
| 1 | SW1 | SW1: Terminal resistance |
| 2 | SW2 | SW2-5: Address setting |
| 3 | SW3 | |
| 4 | SW4 | |
| 5 | SW5 | |
9,Power port setting:
| Power port setting: | ||
| Pin | Name | Function |
| CANL | Communication port | CANL CANH Communication line |
| CANH | ||
| CGND | Communication address | CAN Communication line |
| NC | ||
| GND | Power port | DC: 24V~ 36V |
| +DC | ||
10,Alarm release:
| Alarm release: | |||
| Error code | Error information | ALM warning light | Resetting |
| Err1: (0x01) | Overcurrent or phase-to-phase short circuit | Power-down reset | |
| Err2: (0x02) | Power supply voltage is too high | Lock/Auto reset | |
| Err3: (0x03) | Power supply voltage is too low | Lock/Auto reset | |
| Err5: (0x05) | Out of torlance | Power-down reset | |
11,Use environment:
| Use environment: | ||
| Cooling method | Heat sink cooling | |
| Use environment: | Use environment | Keep away from other heating equipment as far as possible, avoid dust, oil mist, corrosive gas, strong vibration places, prohibit flammable gas and conductive dust |
| Temperature | 0℃ ~ 50℃ | |
| Humidity | 40 ~ 90 %RH (no condensation) | |
| Shock | 10 ~ 55Hz/0.15mm | |
| Storage temperature | -20℃ ~ +80℃ | |
12,Product Dimensions: (Unit=mm)
13,Customized Design:
If this motor do not match with your request. Please feel free to contact with us,We can make customized shaft / winding / mounting flange / cable / connector / Encoder / Brake / Gearbox and others. We will works side-by-side with you and your team to design a motor that will fit the precise needs of your application. All Engineering and Support is done in-house.
14,Customized Shaft Types: